.. Copyright (C) 2007-2015 Hartmut Kaiser Copyright (C) 2011-2012 Bryce Adelstein-Lelbach SPDX-License-Identifier: BSL-1.0 Distributed under the Boost Software License, Version 1.0. (See accompanying file LICENSE_1_0.txt or copy at http://www.boost.org/LICENSE_1_0.txt) .. _launching_and_configuring: ============================================ Launching and configuring |hpx| applications ============================================ .. _configuration: Configuring |hpx| applications ============================== All |hpx| applications can be configured using special command line options and/or using special configuration files. This section describes the available options, the configuration file format, and the algorithm used to locate possible predefined configuration files. Additionally, this section describes the defaults assumed if no external configuration information is supplied. During startup any |hpx| application applies a predefined search pattern to locate one or more configuration files. All found files will be read and merged in the sequence they are found into one single internal database holding all configuration properties. This database is used during the execution of the application to configure different aspects of the runtime system. In addition to the ini files, any application can supply its own configuration files, which will be merged with the configuration database as well. Moreover, the user can specify additional configuration parameters on the command line when executing an application. The |hpx| runtime system will merge all command line configuration options (see the description of the :option:`--hpx:ini`, :option:`--hpx:config`, and :option:`--hpx:app-config` command line options). .. _ini_format: The |hpx| ini file format ------------------------- All |hpx| applications can be configured using a special file format that is similar to the well-known |ini_file_format|_. This is a structured text format that allows users to group key/value pairs (properties) into sections. The basic element contained in an ini file is the property. Every property has a name and a value, delimited by an equal sign ``'='``. The name appears to the left of the equal sign: .. code-block:: ini name=value The value may contain equal signs as only the first ``'='`` character is interpreted as the delimiter between ``name`` and ``value``. Whitespace before the name, after the value and immediately before and after the delimiting equal sign is ignored. Whitespace inside the value is retained. Properties may be grouped into arbitrarily named sections. The section name appears on a line by itself, in square brackets. All properties after the section declaration are associated with that section. There is no explicit "end of section" delimiter; sections end at the next section declaration or the end of the file: .. code-block:: ini [section] In |hpx| sections can be nested. A nested section has a name composed of all section names it is embedded in. The section names are concatenated using a dot ``'.'``: .. code-block:: ini [outer_section.inner_section] Here, ``inner_section`` is logically nested within ``outer_section``. It is possible to use the full section name concatenated with the property name to refer to a particular property. For example, in: .. code-block:: ini [a.b.c] d = e the property value of ``d`` can be referred to as ``a.b.c.d=e``. In |hpx| ini files can contain comments. Hash signs ``'#'`` at the beginning of a line indicate a comment. All characters starting with ``'#'`` until the end of the line are ignored. If a property with the same name is reused inside a section, the second occurrence of this property name will override the first occurrence (discard the first value). Duplicate sections simply merge their properties together, as if they occurred contiguously. In |hpx| ini files a property value ``${FOO:default}`` will use the environmental variable ``FOO`` to extract the actual value if it is set and ``default`` otherwise. No default has to be specified. Therefore, ``${FOO}`` refers to the environmental variable ``FOO``. If ``FOO`` is not set or empty, the overall expression will evaluate to an empty string. A property value ``$[section.key:default]`` refers to the value held by the property ``section.key`` if it exists and ``default`` otherwise. No default has to be specified. Therefore ``$[section.key]`` refers to the property ``section.key``. If the property ``section.key`` is not set or empty, the overall expression will evaluate to an empty string. .. note:: Any property ``$[section.key:default]`` is evaluated whenever it is queried and not when the configuration data is initialized. This allows for lazy evaluation and relaxes initialization order of different sections. The only exception are recursive property values, e.g., values referring to the very key they are associated with. Those property values are evaluated at initialization time to avoid infinite recursion. .. _config_defaults: Built-in default configuration settings --------------------------------------- During startup any |hpx| application applies a predefined search pattern to locate one or more configuration files. All found files will be read and merged in the sequence they are found into one single internal data structure holding all configuration properties. As a first step the internal configuration database is filled with a set of default configuration properties. Those settings are described on a section by section basis below. .. note:: You can print the default configuration settings used for an executable by specifying the command line option :option:`--hpx:dump-config`. The ``system`` configuration section .................................... .. code-block:: ini [system] pid = prefix = executable = .. _ini_system: .. list-table:: * * Property * Description * * ``system.pid`` * This is initialized to store the current OS-process id of the application instance. * * ``system.prefix`` * This is initialized to the base directory |hpx| has been loaded from. * * ``system.executable_prefix`` * This is initialized to the base directory the current executable has been loaded from. The `|hpx| configuration section ................................. .. code-block:: ini [hpx] location = ${HPX_LOCATION:$[system.prefix]} component_path = $[hpx.location]/lib/hpx:$[system.executable_prefix]/lib/hpx:$[system.executable_prefix]/../lib/hpx master_ini_path = $[hpx.location]/share/hpx-:$[system.executable_prefix]/share/hpx-:$[system.executable_prefix]/../share/hpx- ini_path = $[hpx.master_ini_path]/ini os_threads = 1 localities = 1 program_name = cmd_line = lock_detection = ${HPX_LOCK_DETECTION:0} throw_on_held_lock = ${HPX_THROW_ON_HELD_LOCK:1} minimal_deadlock_detection = spinlock_deadlock_detection = spinlock_deadlock_detection_limit = ${HPX_SPINLOCK_DEADLOCK_DETECTION_LIMIT:1000000} max_background_threads = ${HPX_MAX_BACKGROUND_THREADS:$[hpx.os_threads]} max_idle_loop_count = ${HPX_MAX_IDLE_LOOP_COUNT:} max_busy_loop_count = ${HPX_MAX_BUSY_LOOP_COUNT:} max_idle_backoff_time = ${HPX_MAX_IDLE_BACKOFF_TIME:} exception_verbosity = ${HPX_EXCEPTION_VERBOSITY:2} [hpx.stacks] small_size = ${HPX_SMALL_STACK_SIZE:} medium_size = ${HPX_MEDIUM_STACK_SIZE:} large_size = ${HPX_LARGE_STACK_SIZE:} huge_size = ${HPX_HUGE_STACK_SIZE:} use_guard_pages = ${HPX_THREAD_GUARD_PAGE:1} .. _ini_hpx: .. list-table:: * * Property * Description * * ``hpx.location`` * This is initialized to the id of the :term:`locality` this application instance is running on. * * ``hpx.component_path`` * Duplicates are discarded. This property can refer to a list of directories separated by ``':'`` (Linux, Android, and MacOS) or by ``';'`` (Windows). * * ``hpx.master_ini_path`` * This is initialized to the list of default paths of the main hpx.ini configuration files. This property can refer to a list of directories separated by ``':'`` (Linux, Android, and MacOS) or using ``';'`` (Windows). * * ``hpx.ini_path`` * This is initialized to the default path where |hpx| will look for more ini configuration files. This property can refer to a list of directories separated by ``':'`` (Linux, Android, and MacOS) or using ``';'`` (Windows). * * ``hpx.os_threads`` * This setting reflects the number of OS threads used for running |hpx| threads. Defaults to number of detected cores (not hyperthreads/PUs). * * ``hpx.localities`` * This setting reflects the number of localities the application is running on. Defaults to ``1``. * * ``hpx.program_name`` * This setting reflects the program name of the application instance. Initialized from the command line ``argv[0]``. * * ``hpx.cmd_line`` * This setting reflects the actual command line used to launch this application instance. * * ``hpx.lock_detection`` * This setting verifies that no locks are being held while a |hpx| thread is suspended. This setting is applicable only if ``HPX_WITH_VERIFY_LOCKS`` is set during configuration in CMake. * * ``hpx.throw_on_held_lock`` * This setting causes an exception if during lock detection at least one lock is being held while a |hpx| thread is suspended. This setting is applicable only if ``HPX_WITH_VERIFY_LOCKS`` is set during configuration in CMake. This setting has no effect if ``hpx.lock_detection=0``. * * ``hpx.minimal_deadlock_detection`` * This setting enables support for minimal deadlock detection for |hpx| threads. By default this is set to ``1`` (for Debug builds) or to ``0`` (for Release, RelWithDebInfo, RelMinSize builds). This setting is effective only if ``HPX_WITH_THREAD_DEADLOCK_DETECTION`` is set during configuration in CMake. * * ``hpx.spinlock_deadlock_detection`` * This setting verifies that spinlocks don't spin longer than specified using the ``hpx.spinlock_deadlock_detection_limit``. This setting is applicable only if ``HPX_WITH_SPINLOCK_DEADLOCK_DETECTION`` is set during configuration in CMake. By default this is set to ``1`` (for Debug builds) or to ``0`` (for Release, RelWithDebInfo, RelMinSize builds). * * ``hpx.spinlock_deadlock_detection_limit`` * This setting specifies the upper limit of the allowed number of spins that spinlocks are allowed to perform. This setting is applicable only if ``HPX_WITH_SPINLOCK_DEADLOCK_DETECTION`` is set during configuration in CMake. By default this is set to ``1000000``. * * ``hpx.max_background_threads`` * This setting defines the number of threads in the scheduler, which are used to execute background work. By default this is the same as the number of cores used for the scheduler. * * ``hpx.max_idle_loop_count`` * By default this is defined by the preprocessor constant ``HPX_IDLE_LOOP_COUNT_MAX``. This is an internal setting that you should change only if you know exactly what you are doing. * * ``hpx.max_busy_loop_count`` * This setting defines the maximum value of the busy-loop counter in the scheduler. By default this is defined by the preprocessor constant ``HPX_BUSY_LOOP_COUNT_MAX``. This is an internal setting that you should change only if you know exactly what you are doing. * * ``hpx.max_idle_backoff_time`` * This setting defines the maximum time (in milliseconds) for the scheduler to sleep after being idle for ``hpx.max_idle_loop_count`` iterations. This setting is applicable only if ``HPX_WITH_THREAD_MANAGER_IDLE_BACKOFF`` is set during configuration in |cmake|. By default this is defined by the preprocessor constant ``HPX_IDLE_BACKOFF_TIME_MAX``. This is an internal setting that you should change only if you know exactly what you are doing. * * ``hpx.exception_verbosity`` * This setting defines the verbosity of exceptions. Valid values are integers. A setting of ``2`` or higher prints all available information. A setting of ``1`` leaves out the build configuration and environment variables. A setting of ``0`` or lower prints only the description of the thrown exception and the file name, function, and line number where the exception was thrown. The default value is ``2`` or the value of the environment variable ``HPX_EXCEPTION_VERBOSITY``. * * ``hpx.stacks.small_size`` * This is initialized to the small stack size to be used by |hpx| threads. Set by default to the value of the compile time preprocessor constant ``HPX_SMALL_STACK_SIZE`` (defaults to ``0x8000``). This value is used for all |hpx| threads by default, except for the thread running ``hpx_main`` (which runs on a large stack). * * ``hpx.stacks.medium_size`` * This is initialized to the medium stack size to be used by |hpx| threads. Set by default to the value of the compile time preprocessor constant ``HPX_MEDIUM_STACK_SIZE`` (defaults to ``0x20000``). * * ``hpx.stacks.large_size`` * This is initialized to the large stack size to be used by |hpx| threads. Set by default to the value of the compile time preprocessor constant ``HPX_LARGE_STACK_SIZE`` (defaults to ``0x200000``). This setting is used by default for the thread running ``hpx_main`` only. * * ``hpx.stacks.huge_size`` * This is initialized to the huge stack size to be used by |hpx| threads. Set by default to the value of the compile time preprocessor constant ``HPX_HUGE_STACK_SIZE`` (defaults to ``0x2000000``). * * ``hpx.stacks.use_guard_pages`` * This entry controls whether the coroutine library will generate stack guard pages or not. This entry is applicable on Linux only and only if the ``HPX_USE_GENERIC_COROUTINE_CONTEXT`` option is not enabled and the ``HPX_WITH_THREAD_GUARD_PAGE`` is set to 1 while configuring the build system. It is set by default to ``1``. The ``hpx.threadpools`` configuration section ............................................. .. code-block:: ini [hpx.threadpools] io_pool_size = ${HPX_NUM_IO_POOL_SIZE:2} parcel_pool_size = ${HPX_NUM_PARCEL_POOL_SIZE:2} timer_pool_size = ${HPX_NUM_TIMER_POOL_SIZE:2} .. _ini_hpx_thread_pools: .. list-table:: * * Property * Description * * ``hpx.threadpools.io_pool_size`` * The value of this property defines the number of OS threads created for the internal I/O thread pool. * * ``hpx.threadpools.parcel_pool_size`` * The value of this property defines the number of OS threads created for the internal parcel thread pool. * * ``hpx.threadpools.timer_pool_size`` * The value of this property defines the number of OS threads created for the internal timer thread pool. The ``hpx.thread_queue`` configuration section .............................................. .. important:: These are the setting control internal values used by the thread scheduling queues in the |hpx| scheduler. You should not modify these settings unless you know exactly what you are doing. .. code-block:: ini [hpx.thread_queue] min_tasks_to_steal_pending = ${HPX_THREAD_QUEUE_MIN_TASKS_TO_STEAL_PENDING:0} min_tasks_to_steal_staged = ${HPX_THREAD_QUEUE_MIN_TASKS_TO_STEAL_STAGED:0} min_add_new_count = ${HPX_THREAD_QUEUE_MIN_ADD_NEW_COUNT:10} max_add_new_count = ${HPX_THREAD_QUEUE_MAX_ADD_NEW_COUNT:10} max_delete_count = ${HPX_THREAD_QUEUE_MAX_DELETE_COUNT:1000} .. _ini_hpx_thread_queue: .. list-table:: * * Property * Description * * ``hpx.thread_queue.min_tasks_to_steal_pending`` * The value of this property defines the number of pending |hpx| threads that have to be available before neighboring cores are allowed to steal work. The default is to allow stealing always. * * ``hpx.thread_queue.min_tasks_to_steal_staged`` * The value of this property defines the number of staged |hpx| tasks that need to be available before neighboring cores are allowed to steal work. The default is to allow stealing always. * * ``hpx.thread_queue.min_add_new_count`` * The value of this property defines the minimal number of tasks to be converted into |hpx| threads whenever the thread queues for a core have run empty. * * ``hpx.thread_queue.max_add_new_count`` * The value of this property defines the maximal number of tasks to be converted into |hpx| threads whenever the thread queues for a core have run empty. * * ``hpx.thread_queue.max_delete_count`` * The value of this property defines the number of terminated |hpx| threads to discard during each invocation of the corresponding function. The ``hpx.components`` configuration section ............................................ .. code-block:: ini [hpx.components] load_external = ${HPX_LOAD_EXTERNAL_COMPONENTS:1} .. _ini_hpx_components: .. list-table:: * * Property * Description * * ``hpx.components.load_external`` * This entry defines whether external components will be loaded on this :term:`locality`. This entry is normally set to ``1``, and usually there is no need to directly change this value. It is automatically set to ``0`` for a dedicated :term:`AGAS` server :term:`locality`. Additionally, the section ``hpx.components`` will be populated with the information gathered from all found components. The information loaded for each of the components will contain at least the following properties: .. code-block:: ini [hpx.components.] name = path = enabled = $[hpx.components.load_external] .. _ini_hpx_components_custom: .. list-table:: * * Property * Description * * ``hpx.components..name`` * This is the name of a component, usually the same as the second argument to the macro used while registering the component with :c:macro:`HPX_REGISTER_COMPONENT`. Set by the component factory. * * ``hpx.components..path`` * This is either the full path file name of the component module or the directory the component module is located in. In this case, the component module name will be derived from the property ``hpx.components..name``. Set by the component factory. * * ``hpx.components..enabled`` * This setting explicitly enables or disables the component. This is an optional property. |Hpx| assumes that the component is enabled if it is not defined. The value for ```` is usually the same as for the corresponding ``name`` property. However, generally it can be defined to any arbitrary instance name. It is used to distinguish between different ini sections, one for each component. The ``hpx.parcel`` configuration section ........................................ .. code-block:: ini [hpx.parcel] address = ${HPX_PARCEL_SERVER_ADDRESS:} port = ${HPX_PARCEL_SERVER_PORT:} bootstrap = ${HPX_PARCEL_BOOTSTRAP:} max_connections = ${HPX_PARCEL_MAX_CONNECTIONS:} max_connections_per_locality = ${HPX_PARCEL_MAX_CONNECTIONS_PER_LOCALITY:} max_message_size = ${HPX_PARCEL_MAX_MESSAGE_SIZE:} max_outbound_message_size = ${HPX_PARCEL_MAX_OUTBOUND_MESSAGE_SIZE:} array_optimization = ${HPX_PARCEL_ARRAY_OPTIMIZATION:1} zero_copy_optimization = ${HPX_PARCEL_ZERO_COPY_OPTIMIZATION:$[hpx.parcel.array_optimization]} async_serialization = ${HPX_PARCEL_ASYNC_SERIALIZATION:1} message_handlers = ${HPX_PARCEL_MESSAGE_HANDLERS:0} .. _ini_hpx_parcel: .. list-table:: * * Property * Description * * ``hpx.parcel.address`` * This property defines the default IP address to be used for the :term:`parcel` layer to listen to. This IP address will be used as long as no other values are specified (for instance, using the :option:`--hpx:hpx` command line option). The expected format is any valid IP address or domain name format that can be resolved into an IP address. The default depends on the compile time preprocessor constant ``HPX_INITIAL_IP_ADDRESS`` (``"127.0.0.1"``). * * ``hpx.parcel.port`` * This property defines the default IP port to be used for the :term:`parcel` layer to listen to. This IP port will be used as long as no other values are specified (for instance using the :option:`--hpx:hpx` command line option). The default depends on the compile time preprocessor constant ``HPX_INITIAL_IP_PORT`` (``7910``). * * ``hpx.parcel.bootstrap`` * This property defines which parcelport type should be used during application bootstrap. The default depends on the compile time preprocessor constant ``HPX_PARCEL_BOOTSTRAP`` (``"tcp"``). * * ``hpx.parcel.max_connections`` * This property defines how many network connections between different localities are overall kept alive by each :term:`locality`. The default depends on the compile time preprocessor constant ``HPX_PARCEL_MAX_CONNECTIONS`` (``512``). * * ``hpx.parcel.max_connections_per_locality`` * This property defines the maximum number of network connections that one :term:`locality` will open to another :term:`locality`. The default depends on the compile time preprocessor constant ``HPX_PARCEL_MAX_CONNECTIONS_PER_LOCALITY`` (``4``). * * ``hpx.parcel.max_message_size`` * This property defines the maximum allowed message size that will be transferrable through the :term:`parcel` layer. The default depends on the compile time preprocessor constant ``HPX_PARCEL_MAX_MESSAGE_SIZE`` (``1000000000`` bytes). * * ``hpx.parcel.max_outbound_message_size`` * This property defines the maximum allowed outbound coalesced message size that will be transferrable through the parcel layer. The default depends on the compile time preprocessor constant ``HPX_PARCEL_MAX_OUTBOUND_MESSAGE_SIZE`` (``1000000`` bytes). * * ``hpx.parcel.array_optimization`` * This property defines whether this :term:`locality` is allowed to utilize array optimizations during serialization of :term:`parcel` data. The default is ``1``. * * ``hpx.parcel.zero_copy_optimization`` * This property defines whether this :term:`locality` is allowed to utilize zero copy optimizations during serialization of :term:`parcel` data. The default is the same value as set for ``hpx.parcel.array_optimization``. * * ``hpx.parcel.zero_copy_serialization_threshold`` * This property defines the threshold value (in bytes) starting at which the serialization layer will apply zero-copy optimizations for serialized entities. The default value is defined by the preprocessor constant ``HPX_ZERO_COPY_SERIALIZATION_THRESHOLD``. * * ``hpx.parcel.async_serialization`` * This property defines whether this :term:`locality` is allowed to spawn a new thread for serialization (this is both for encoding and decoding parcels). The default is ``1``. * * ``hpx.parcel.message_handlers`` * This property defines whether message handlers are loaded. The default is ``0``. * * ``hpx.parcel.max_background_threads`` * This property defines how many cores should be used to perform background operations. The default is ``-1`` (all cores). The following settings relate to the TCP/IP parcelport. .. code-block:: ini [hpx.parcel.tcp] enable = ${HPX_HAVE_PARCELPORT_TCP:$[hpx.parcel.enabled]} array_optimization = ${HPX_PARCEL_TCP_ARRAY_OPTIMIZATION:$[hpx.parcel.array_optimization]} zero_copy_optimization = ${HPX_PARCEL_TCP_ZERO_COPY_OPTIMIZATION:$[hpx.parcel.zero_copy_optimization]} zero_copy_serialization_threshold = ${HPX_PARCEL_TCP_ZERO_COPY_SERIALIZATION_THRESHOLD:$[hpx.parcel.zero_copy_serialization_threshold]} async_serialization = ${HPX_PARCEL_TCP_ASYNC_SERIALIZATION:$[hpx.parcel.async_serialization]} parcel_pool_size = ${HPX_PARCEL_TCP_PARCEL_POOL_SIZE:$[hpx.threadpools.parcel_pool_size]} max_connections = ${HPX_PARCEL_TCP_MAX_CONNECTIONS:$[hpx.parcel.max_connections]} max_connections_per_locality = ${HPX_PARCEL_TCP_MAX_CONNECTIONS_PER_LOCALITY:$[hpx.parcel.max_connections_per_locality]} max_message_size = ${HPX_PARCEL_TCP_MAX_MESSAGE_SIZE:$[hpx.parcel.max_message_size]} max_outbound_message_size = ${HPX_PARCEL_TCP_MAX_OUTBOUND_MESSAGE_SIZE:$[hpx.parcel.max_outbound_message_size]} max_background_threads = ${HPX_PARCEL_TCP_MAX_BACKGROUND_THREADS:$[hpx.parcel.max_background_threads]} .. _ini_hpx_parcel_tcp: .. list-table:: * * Property * Description * * ``hpx.parcel.tcp.enable`` * Enables the use of the default TCP parcelport. Note that the initial bootstrap of the overall |hpx| application will be performed using the default TCP connections. This parcelport is enabled by default. This will be disabled only if MPI is enabled (see below). * * ``hpx.parcel.tcp.array_optimization`` * This property defines whether this :term:`locality` is allowed to utilize array optimizations in the TCP/IP parcelport during serialization of parcel data. The default is the same value as set for ``hpx.parcel.array_optimization``. * * ``hpx.parcel.tcp.zero_copy_optimization`` * This property defines whether this :term:`locality` is allowed to utilize zero copy optimizations in the TCP/IP parcelport during serialization of parcel data. The default is the same value as set for ``hpx.parcel.zero_copy_optimization``. * * ``hpx.parcel.tcp.zero_copy_serialization_threshold`` * This property defines the threshold value (in bytes) starting at which the serialization layer will apply zero-copy optimizations for serialized entities. The default is the same value as set for ``hpx.parcel.zero_copy_serialization_threshold``. * * ``hpx.parcel.tcp.async_serialization`` * This property defines whether this :term:`locality` is allowed to spawn a new thread for serialization in the TCP/IP parcelport (this is both for encoding and decoding parcels). The default is the same value as set for ``hpx.parcel.async_serialization``. * * ``hpx.parcel.tcp.parcel_pool_size`` * The value of this property defines the number of OS threads created for the internal parcel thread pool of the TCP :term:`parcel` port. The default is taken from ``hpx.threadpools.parcel_pool_size``. * * ``hpx.parcel.tcp.max_connections`` * This property defines how many network connections between different localities are overall kept alive by each :term:`locality`. The default is taken from ``hpx.parcel.max_connections``. * * ``hpx.parcel.tcp.max_connections_per_locality`` * This property defines the maximum number of network connections that one :term:`locality` will open to another :term:`locality`. The default is taken from ``hpx.parcel.max_connections_per_locality``. * * ``hpx.parcel.tcp.max_message_size`` * This property defines the maximum allowed message size that will be transferrable through the :term:`parcel` layer. The default is taken from ``hpx.parcel.max_message_size``. * * ``hpx.parcel.tcp.max_outbound_message_size`` * This property defines the maximum allowed outbound coalesced message size that will be transferrable through the :term:`parcel` layer. The default is taken from ``hpx.parcel.max_outbound_connections``. * * ``hpx.parcel.tcp.max_background_threads`` * This property defines how many cores should be used to perform background operations. The default is taken from ``hpx.parcel.max_background_threads``. The following settings relate to the MPI parcelport. These settings take effect only if the compile time constant ``HPX_HAVE_PARCELPORT_MPI`` is set (the equivalent CMake variable is ``HPX_WITH_PARCELPORT_MPI`` and has to be set to ``ON``). .. code-block:: ini [hpx.parcel.mpi] enable = ${HPX_HAVE_PARCELPORT_MPI:$[hpx.parcel.enabled]} env = ${HPX_HAVE_PARCELPORT_MPI_ENV:MV2_COMM_WORLD_RANK,PMI_RANK,OMPI_COMM_WORLD_SIZE,ALPS_APP_PE,PALS_NODEID} multithreaded = ${HPX_HAVE_PARCELPORT_MPI_MULTITHREADED:1} rank = processor_name = array_optimization = ${HPX_HAVE_PARCEL_MPI_ARRAY_OPTIMIZATION:$[hpx.parcel.array_optimization]} zero_copy_optimization = ${HPX_HAVE_PARCEL_MPI_ZERO_COPY_OPTIMIZATION:$[hpx.parcel.zero_copy_optimization]} zero_copy_serialization_threshold = ${HPX_PARCEL_MPI_ZERO_COPY_SERIALIZATION_THRESHOLD:$[hpx.parcel.zero_copy_serialization_threshold]} use_io_pool = ${HPX_HAVE_PARCEL_MPI_USE_IO_POOL:$1} async_serialization = ${HPX_HAVE_PARCEL_MPI_ASYNC_SERIALIZATION:$[hpx.parcel.async_serialization]} parcel_pool_size = ${HPX_HAVE_PARCEL_MPI_PARCEL_POOL_SIZE:$[hpx.threadpools.parcel_pool_size]} max_connections = ${HPX_HAVE_PARCEL_MPI_MAX_CONNECTIONS:$[hpx.parcel.max_connections]} max_connections_per_locality = ${HPX_HAVE_PARCEL_MPI_MAX_CONNECTIONS_PER_LOCALITY:$[hpx.parcel.max_connections_per_locality]} max_message_size = ${HPX_HAVE_PARCEL_MPI_MAX_MESSAGE_SIZE:$[hpx.parcel.max_message_size]} max_outbound_message_size = ${HPX_HAVE_PARCEL_MPI_MAX_OUTBOUND_MESSAGE_SIZE:$[hpx.parcel.max_outbound_message_size]} max_background_threads = ${HPX_PARCEL_MPI_MAX_BACKGROUND_THREADS:$[hpx.parcel.max_background_threads]} .. _ini_hpx_parcel_mpi: .. list-table:: * * Property * Description * * ``hpx.parcel.mpi.enable`` * Enables the use of the MPI parcelport. |hpx| tries to detect if the application was started within a parallel MPI environment. If the detection was successful, the MPI parcelport is enabled by default. To explicitly disable the MPI parcelport, set to 0. Note that the initial bootstrap of the overall |hpx| application will be performed using MPI as well. * * ``hpx.parcel.mpi.env`` * This property influences which environment variables (separated by commas) will be analyzed to find out whether the application was invoked by MPI. * * ``hpx.parcel.mpi.multithreaded`` * This property is used to determine what threading mode to use when initializing MPI. If this setting is ``0``, |hpx| will initialize MPI with ``MPI_THREAD_SINGLE``. If the value is not equal to ``0``, |hpx| will initialize MPI with ``MPI_THREAD_MULTI``. * * ``hpx.parcel.mpi.rank`` * This property will be initialized to the MPI rank of the :term:`locality`. * * ``hpx.parcel.mpi.processor_name`` * This property will be initialized to the MPI processor name of the :term:`locality`. * * ``hpx.parcel.mpi.array_optimization`` * This property defines whether this :term:`locality` is allowed to utilize array optimizations in the MPI parcelport during serialization of :term:`parcel` data. The default is the same value as set for ``hpx.parcel.array_optimization``. * * ``hpx.parcel.mpi.zero_copy_optimization`` * This property defines whether this :term:`locality` is allowed to utilize zero copy optimizations in the MPI parcelport during serialization of parcel data. The default is the same value as set for ``hpx.parcel.zero_copy_optimization``. * * ``hpx.parcel.mpi.zero_copy_serialization_threshold`` * This property defines the threshold value (in bytes) starting at which the serialization layer will apply zero-copy optimizations for serialized entities. The default is the same value as set for ``hpx.parcel.zero_copy_serialization_threshold``. * * ``hpx.parcel.mpi.use_io_pool`` * This property can be set to run the progress thread inside of |hpx| threads instead of a separate thread pool. The default is ``1``. * * ``hpx.parcel.mpi.async_serialization`` * This property defines whether this :term:`locality` is allowed to spawn a new thread for serialization in the MPI parcelport (this is both for encoding and decoding parcels). The default is the same value as set for ``hpx.parcel.async_serialization``. * * ``hpx.parcel.mpi.parcel_pool_size`` * The value of this property defines the number of OS threads created for the internal parcel thread pool of the MPI :term:`parcel` port. The default is taken from ``hpx.threadpools.parcel_pool_size``. * * ``hpx.parcel.mpi.max_connections`` * This property defines how many network connections between different localities are overall kept alive by each :term:`locality`. The default is taken from ``hpx.parcel.max_connections``. * * ``hpx.parcel.mpi.max_connections_per_locality`` * This property defines the maximum number of network connections that one :term:`locality` will open to another :term:`locality`. The default is taken from ``hpx.parcel.max_connections_per_locality``. * * ``hpx.parcel.mpi.max_message_size`` * This property defines the maximum allowed message size that will be transferrable through the :term:`parcel` layer. The default is taken from ``hpx.parcel.max_message_size``. * * ``hpx.parcel.mpi.max_outbound_message_size`` * This property defines the maximum allowed outbound coalesced message size that will be transferrable through the :term:`parcel` layer. The default is taken from ``hpx.parcel.max_outbound_connections``. * * ``hpx.parcel.tcp.max_background_threads`` * This property defines how many cores should be used to perform background operations. The default is taken from ``hpx.parcel.max_background_threads``. The ``hpx.agas`` configuration section ...................................... .. code-block:: ini [hpx.agas] address = ${HPX_AGAS_SERVER_ADDRESS:} port = ${HPX_AGAS_SERVER_PORT:} service_mode = hosted dedicated_server = 0 max_pending_refcnt_requests = ${HPX_AGAS_MAX_PENDING_REFCNT_REQUESTS:} use_caching = ${HPX_AGAS_USE_CACHING:1} use_range_caching = ${HPX_AGAS_USE_RANGE_CACHING:1} local_cache_size = ${HPX_AGAS_LOCAL_CACHE_SIZE:} .. REVIEW regarding hpx.agas.address and hpx.agas.port: Technically, I believe --hpx:agas sets this parameter, this may need to be reworded. .. _ini_hpx_agas: .. list-table:: * * Property * Description * * ``hpx.agas.address`` * This property defines the default IP address to be used for the :term:`AGAS` root server. This IP address will be used as long as no other values are specified (for instance, using the :option:`--hpx:agas` command line option). The expected format is any valid IP address or domain name format that can be resolved into an IP address. The default depends on the compile time preprocessor constant ``HPX_INITIAL_IP_ADDRESS`` (``"127.0.0.1"``). * * ``hpx.agas.port`` * This property defines the default IP port to be used for the :term:`AGAS` root server. This IP port will be used as long as no other values are specified (for instance, using the :option:`--hpx:agas` command line option). The default depends on the compile time preprocessor constant ``HPX_INITIAL_IP_PORT`` (``7009``). * * ``hpx.agas.service_mode`` * This property specifies what type of :term:`AGAS` service is running on this :term:`locality`. Currently, two modes exist. The :term:`locality` that acts as the :term:`AGAS` server runs in ``bootstrap`` mode. All other localities are in ``hosted`` mode. * * ``hpx.agas.dedicated_server`` * This property specifies whether the :term:`AGAS` server is exclusively running :term:`AGAS` services and not hosting any application components. It is a boolean value. Set to ``1`` if :option:`--hpx:run-agas-server-only` is present. * * ``hpx.agas.max_pending_refcnt_requests`` * This property defines the number of reference counting requests (increments or decrements) to buffer. The default depends on the compile time preprocessor constant ``HPX_INITIAL_AGAS_MAX_PENDING_REFCNT_REQUESTS`` (``4096``). * * ``hpx.agas.use_caching`` * This property specifies whether a software address translation cache is used. It is a boolean value. Defaults to ``1``. * * ``hpx.agas.use_range_caching`` * This property specifies whether range-based caching is used by the software address translation cache. This property is ignored if `hpx.agas.use_caching` is false. It is a boolean value. Defaults to ``1``. * * ``hpx.agas.local_cache_size`` * This property defines the size of the software address translation cache for :term:`AGAS` services. This property is ignored if ``hpx.agas.use_caching`` is false. Note that if ``hpx.agas.use_range_caching`` is true, this size will refer to the maximum number of ranges stored in the cache, not the number of entries spanned by the cache. The default depends on the compile time preprocessor constant ``HPX_AGAS_LOCAL_CACHE_SIZE`` (``4096``). The ``hpx.commandline`` configuration section ............................................. The following table lists the definition of all pre-defined command line option shortcuts. For more information about commandline options, see the section :ref:`commandline`. .. code-block:: ini [hpx.commandline] aliasing = ${HPX_COMMANDLINE_ALIASING:1} allow_unknown = ${HPX_COMMANDLINE_ALLOW_UNKNOWN:0} [hpx.commandline.aliases] -a = --hpx:agas -c = --hpx:console -h = --hpx:help -I = --hpx:ini -l = --hpx:localities -p = --hpx:app-config -q = --hpx:queuing -r = --hpx:run-agas-server -t = --hpx:threads -v = --hpx:version -w = --hpx:worker -x = --hpx:hpx -0 = --hpx:node=0 -1 = --hpx:node=1 -2 = --hpx:node=2 -3 = --hpx:node=3 -4 = --hpx:node=4 -5 = --hpx:node=5 -6 = --hpx:node=6 -7 = --hpx:node=7 -8 = --hpx:node=8 -9 = --hpx:node=9 .. _ini_hpx_shortuts: .. list-table:: * * Property * Description * * ``hpx.commandline.aliasing`` * Enable command line aliases as defined in the section ``hpx.commandline.aliases`` (see below). Defaults to ``1``. * * ``hpx.commandline.allow_unknown`` * Allow for unknown command line options to be passed through to ``hpx_main()`` Defaults to ``0``. * * ``hpx.commandline.aliases.-a`` * On the commandline ``-a`` expands to: :option:`--hpx:agas`. * * ``hpx.commandline.aliases.-c`` * On the commandline ``-c`` expands to: :option:`--hpx:console`. * * ``hpx.commandline.aliases.-h`` * On the commandline ``-h`` expands to: :option:`--hpx:help`. * * ``hpx.commandline.aliases.--help`` * On the commandline ``--help`` expands to: :option:`--hpx:help`. * * ``hpx.commandline.aliases.-I`` * On the commandline ``-I`` expands to: :option:`--hpx:ini`. * * ``hpx.commandline.aliases.-l`` * On the commandline ``-l`` expands to: :option:`--hpx:localities`. * * ``hpx.commandline.aliases.-p`` * On the commandline ``-p`` expands to: :option:`--hpx:app-config`. * * ``hpx.commandline.aliases.-q`` * On the commandline ``-q`` expands to: :option:`--hpx:queuing`. * * ``hpx.commandline.aliases.-r`` * On the commandline ``-r`` expands to: :option:`--hpx:run-agas-server`. * * ``hpx.commandline.aliases.-t`` * On the commandline ``-t`` expands to: :option:`--hpx:threads`. * * ``hpx.commandline.aliases.-v`` * On the commandline ``-v`` expands to: :option:`--hpx:version`. * * ``hpx.commandline.aliases.--version`` * On the commandline ``--version`` expands to: :option:`--hpx:version`. * * ``hpx.commandline.aliases.-w`` * On the commandline ``-w`` expands to: :option:`--hpx:worker`. * * ``hpx.commandline.aliases.-x`` * On the commandline ``-x`` expands to: :option:`--hpx:hpx`. * * ``hpx.commandline.aliases.-0`` * On the commandline ``-0`` expands to: :option:`--hpx:node`\ ``=0``. * * ``hpx.commandline.aliases.-1`` * On the commandline ``-1`` expands to: :option:`--hpx:node`\ ``=1``. * * ``hpx.commandline.aliases.-2`` * On the commandline ``-2`` expands to: :option:`--hpx:node`\ ``=2``. * * ``hpx.commandline.aliases.-3`` * On the commandline ``-3`` expands to: :option:`--hpx:node`\ ``=3``. * * ``hpx.commandline.aliases.-4`` * On the commandline ``-4`` expands to: :option:`--hpx:node`\ ``=4``. * * ``hpx.commandline.aliases.-5`` * On the commandline ``-5`` expands to: :option:`--hpx:node`\ ``=5``. * * ``hpx.commandline.aliases.-6`` * On the commandline ``-6`` expands to: :option:`--hpx:node`\ ``=6``. * * ``hpx.commandline.aliases.-7`` * On the commandline ``-7`` expands to: :option:`--hpx:node`\ ``=7``. * * ``hpx.commandline.aliases.-8`` * On the commandline ``-8`` expands to: :option:`--hpx:node`\ ``=8``. * * ``hpx.commandline.aliases.-9`` * On the commandline ``-9`` expands to: :option:`--hpx:node`\ ``=9``. .. _loading_ini_files: Loading INI files ----------------- During startup and after the internal database has been initialized as described in the section :ref:`config_defaults`, |hpx| will try to locate and load additional ini files to be used as a source for configuration properties. This allows for a wide spectrum of additional customization possibilities by the user and system administrators. The sequence of locations where |hpx| will try loading the ini files is well defined and documented in this section. All ini files found are merged into the internal configuration database. The merge operation itself conforms to the rules as described in the section :ref:`ini_format`. #. Load all component shared libraries found in the directories specified by the property ``hpx.component_path`` and retrieve their default configuration information (see section :ref:`loading_components` for more details). This property can refer to a list of directories separated by ``':'`` (Linux, Android, and MacOS) or by ``';'`` (Windows). #. Load all files named ``hpx.ini`` in the directories referenced by the property ``hpx.master_ini_path`` This property can refer to a list of directories separated by ``':'`` (Linux, Android, and MacOS) or by ``';'`` (Windows). #. Load a file named ``.hpx.ini`` in the current working directory, e.g., the directory the application was invoked from. #. Load a file referenced by the environment variable ``HPX_INI``. This variable is expected to provide the full path name of the ini configuration file (if any). #. Load a file named ``/etc/hpx.ini``. This lookup is done on non-Windows systems only. #. Load a file named ``.hpx.ini`` in the home directory of the current user, e.g., the directory referenced by the environment variable ``HOME``. #. Load a file named ``.hpx.ini`` in the directory referenced by the environment variable ``PWD``. #. Load the file specified on the command line using the option :option:`--hpx:config`. #. Load all properties specified on the command line using the option :option:`--hpx:ini`. The properties will be added to the database in the same sequence as they are specified on the command line. The format for those options is, for instance, :option:`--hpx:ini`\ ``=hpx.default_stack_size=0x4000``. In addition to the explicit command line options, this will set the following properties as implied from other settings: * ``hpx.parcel.address`` and ``hpx.parcel.port`` as set by :option:`--hpx:hpx` * ``hpx.agas.address``, ``hpx.agas.port`` and ``hpx.agas.service_mode`` as set by :option:`--hpx:agas` * ``hpx.program_name`` and ``hpx.cmd_line`` will be derived from the actual command line * ``hpx.os_threads`` and ``hpx.localities`` as set by :option:`--hpx:threads` and :option:`--hpx:localities` * ``hpx.runtime_mode`` will be derived from any explicit :option:`--hpx:console`, :option:`--hpx:worker`, or :option:`--hpx:connect`, or it will be derived from other settings, such as :option:`--hpx:node` ``=0``, which implies :option:`--hpx:console`. #. Load files based on the pattern ``*.ini`` in all directories listed by the property ``hpx.ini_path``. All files found during this search will be merged. The property ``hpx.ini_path`` can hold a list of directories separated by ``':'`` (on Linux or Mac) or ``';'`` (on Windows). #. Load the file specified on the command line using the option :option:`--hpx:app-config`. Note that this file will be merged as the content for a top level section ``[application]``. .. note:: Any changes made to the configuration database caused by one of the steps will influence the loading process for all subsequent steps. For instance, if one of the ini files loaded changes the property ``hpx.ini_path``, this will influence the directories searched in step 9 as described above. .. important:: The |hpx| core library will verify that all configuration settings specified on the command line (using the :option:`--hpx:ini` option) will be checked for validity. That means that the library will accept only *known* configuration settings. This is to protect the user from unintentional typos while specifying those settings. This behavior can be overwritten by appending a ``'!'`` to the configuration key, thus forcing the setting to be entered into the configuration database. For instance: :option:`--hpx:ini`\ ``=hpx.foo! = 1`` If any of the environment variables or files listed above are not found, the corresponding loading step will be silently skipped. .. _loading_components: Loading components ================== |hpx| relies on loading application specific components during the runtime of an application. Moreover, |hpx| comes with a set of preinstalled components supporting basic functionalities useful for almost every application. Any component in |hpx| is loaded from a shared library, where any of the shared libraries can contain more than one component type. During startup, |hpx| tries to locate all available components (e.g., their corresponding shared libraries) and creates an internal component registry for later use. This section describes the algorithm used by |hpx| to locate all relevant shared libraries on a system. As described, this algorithm is customizable by the configuration properties loaded from the ini files (see section :ref:`loading_ini_files`). Loading components is a two-stage process. First |hpx| tries to locate all component shared libraries, loads those, and generates a default configuration section in the internal configuration database for each component found. For each found component the following information is generated: .. code-block:: ini [hpx.components.] name = path = $[component_path] enabled = $[hpx.components.load_external] default = 1 The values in this section correspond to the expected configuration information for a component as described in the section :ref:`config_defaults`. In order to locate component shared libraries, |hpx| will try loading all shared libraries (files with the platform specific extension of a shared library, Linux: ``*.so``, Windows: ``*.dll``, MacOS: ``*.dylib`` found in the directory referenced by the ini property ``hpx.component_path``). This first step corresponds to step 1) during the process of filling the internal configuration database with default information as described in section :ref:`loading_ini_files`. After all of the configuration information has been loaded, |hpx| performs the second step in terms of loading components. During this step, |hpx| scans all existing configuration sections ``[hpx.component.]`` and instantiates a special factory object for each of the successfully located and loaded components. During the application's life time, these factory objects are responsible for creating new and discarding old instances of the component they are associated with. This step is performed after step 11) of the process of filling the internal configuration database with default information as described in section :ref:`loading_ini_files`. .. _component_example: Application specific component example -------------------------------------- This section assumes there is a simple application component that exposes one member function as a component action. The header file ``app_server.hpp`` declares the C++ type to be exposed as a component. This type has a member function ``print_greeting()``, which is exposed as an action ``print_greeting_action``. We assume the source files for this example are located in a directory referenced by ``$APP_ROOT``: .. code-block:: c++ // file: $APP_ROOT/app_server.hpp #include #include namespace app { // Define a simple component exposing one action 'print_greeting' class HPX_COMPONENT_EXPORT server : public hpx::components::component_base { void print_greeting () { hpx::cout << "Hey, how are you?\n" << std::flush; } // Component actions need to be declared, this also defines the // type 'print_greeting_action' representing the action. HPX_DEFINE_COMPONENT_ACTION(server, print_greeting, print_greeting_action); }; } // Declare boilerplate code required for each of the component actions. HPX_REGISTER_ACTION_DECLARATION(app::server::print_greeting_action); The corresponding source file contains mainly macro invocations that define the boilerplate code needed for |hpx| to function properly: .. code-block:: c++ // file: $APP_ROOT/app_server.cpp #include "app_server.hpp" // Define boilerplate required once per component module. HPX_REGISTER_COMPONENT_MODULE(); // Define factory object associated with our component of type 'app::server'. HPX_REGISTER_COMPONENT(app::server, app_server); // Define boilerplate code required for each of the component actions. Use the // same argument as used for HPX_REGISTER_ACTION_DECLARATION above. HPX_REGISTER_ACTION(app::server::print_greeting_action); The following gives an example of how the component can be used. Here, one instance of the ``app::server`` component is created on the current :term:`locality` and the exposed action ``print_greeting_action`` is invoked using the global id of the newly created instance. Note that no special code is required to delete the component instance after it is not needed anymore. It will be deleted automatically when its last reference goes out of scope (shown in the example below at the closing brace of the block surrounding the code): .. code-block:: c++ // file: $APP_ROOT/use_app_server_example.cpp #include #include "app_server.hpp" int hpx_main() { { // Create an instance of the app_server component on the current locality. hpx::naming:id_type app_server_instance = hpx::create_component(hpx::find_here()); // Create an instance of the action 'print_greeting_action'. app::server::print_greeting_action print_greeting; // Invoke the action 'print_greeting' on the newly created component. print_greeting(app_server_instance); } return hpx::finalize(); } int main(int argc, char* argv[]) { return hpx::init(argc, argv); } In order to make sure that the application will be able to use the component ``app::server``, special configuration information must be passed to |hpx|. The simplest way to allow |hpx| to 'find' the component is to provide special ini configuration files that add the necessary information to the internal configuration database. The component should have a special ini file containing the information specific to the component ``app_server``. .. code-block:: ini # file: $APP_ROOT/app_server.ini [hpx.components.app_server] name = app_server path = $APP_LOCATION/ Here, ``$APP_LOCATION`` is the directory where the (binary) component shared library is located. |hpx| will attempt to load the shared library from there. The section name ``hpx.components.app_server`` reflects the instance name of the component (``app_server`` is an arbitrary, but unique name). The property value for ``hpx.components.app_server.name`` should be the same as used for the second argument to the macro :c:macro:`HPX_REGISTER_COMPONENT` above. Additionally, a file ``.hpx.ini``, which could be located in the current working directory (see step 3 as described in the section :ref:`loading_ini_files`), can be used to add to the ini search path for components: .. code-block:: ini # file: $PWD/.hpx.ini [hpx] ini_path = $[hpx.ini_path]:$APP_ROOT/ This assumes that the above ini file specific to the component is located in the directory ``$APP_ROOT``. .. note:: It is possible to reference the defined property from inside its value. |hpx| will gracefully use the previous value of ``hpx.ini_path`` for the reference on the right hand side and assign the overall (now expanded) value to the property. .. _logging: Logging ======= |hpx| uses a sophisticated logging framework, allowing users to follow in detail what operations have been performed inside the |hpx| library in what sequence. This information proves to be very useful for diagnosing problems or just for improving the understanding of what is happening in |hpx| as a consequence of invoking |hpx| API functionality. Default logging --------------- Enabling default logging is a simple process. The detailed description in the remainder of this section explains different ways to customize the defaults. Default logging can be enabled by using one of the following: * A command line switch :option:`--hpx:debug-hpx-log`, which will enable logging to the console terminal. * The command line switch :option:`--hpx:debug-hpx-log`\ ``=``, which enables logging to a given file ````. * Setting an environment variable ``HPX_LOGLEVEL=`` while running the |hpx| application. In this case ```` should be a number between (or equal to) ``1`` and ``5`` where ``1`` means minimal logging and ``5`` causes all available messages to be logged. When setting the environment variable, the logs will be written to a file named ``hpx..lo`` in the current working directory, where ```` is the process id of the console instance of the application. Customizing logging ------------------- Generally, logging can be customized either using environment variable settings or using by an ini configuration file. Logging is generated in several categories, each of which can be customized independently. All customizable configuration parameters have reasonable defaults, allowing for the use of logging without any additional configuration effort. The following table lists the available categories. .. list-table:: Logging categories * * Category * Category shortcut * Information to be generated * Environment variable * * General * None * Logging information generated by different subsystems of |hpx|, such as thread-manager, parcel layer, LCOs, etc. * ``HPX_LOGLEVEL`` * * :term:`AGAS` * ``AGAS`` * Logging output generated by the :term:`AGAS` subsystem * ``HPX_AGAS_LOGLEVEL`` * * Application * ``APP`` * Logging generated by applications. * ``HPX_APP_LOGLEVEL`` By default, all logging output is redirected to the console instance of an application, where it is collected and written to a file, one file for each logging category. Each logging category can be customized at two levels. The parameters for each are stored in the ini configuration sections ``hpx.logging.CATEGORY`` and ``hpx.logging.console.CATEGORY`` (where ``CATEGORY`` is the category shortcut as listed in the table above). The former influences logging at the source :term:`locality` and the latter modifies the logging behaviour for each of the categories at the console instance of an application. Levels ------ All |hpx| logging output has seven different logging levels. These levels can be set explicitly or through environment variables in the main |hpx| ini file as shown below. The logging levels and their associated integral values are shown in the table below, ordered from most verbose to least verbose. By default, all |hpx| logs are set to 0, e.g., all logging output is disabled by default. .. table:: Logging levels ============= ============== Logging level Integral value ============= ============== ```` ``5`` ```` ``4`` ```` ``3`` ```` ``2`` ```` ``1`` No logging ``0`` ============= ============== .. tip:: The easiest way to enable logging output is to set the environment variable corresponding to the logging category to an integral value as described in the table above. For instance, setting ``HPX_LOGLEVEL=5`` will enable full logging output for the general category. Please note that the syntax and means of setting environment variables varies between operating systems. Configuration ------------- Logs will be saved to destinations as configured by the user. By default, logging output is saved on the console instance of an application to ``hpx...lo`` (where ``CATEGORY`` and ``PID>`` are placeholders for the category shortcut and the OS process id). The output for the general logging category is saved to ``hpx..log``. The default settings for the general logging category are shown here (the syntax is described in the section :ref:`ini_format`): .. code-block:: ini [hpx.logging] level = ${HPX_LOGLEVEL:0} destination = ${HPX_LOGDESTINATION:console} format = ${HPX_LOGFORMAT:(T%locality%/%hpxthread%.%hpxphase%/%hpxcomponent%) P%parentloc%/%hpxparent%.%hpxparentphase% %time%($hh:$mm.$ss.$mili) [%idx%]|\\n} The logging level is taken from the environment variable ``HPX_LOGLEVEL`` and defaults to zero, e.g., no logging. The default logging destination is read from the environment variable ``HPX_LOGDESTINATION`` On any of the localities it defaults to ``console``, which redirects all generated logging output to the console instance of an application. The following table lists the possible destinations for any logging output. It is possible to specify more than one destination separated by whitespace. .. list-table:: Logging destinations * * Logging destination * Description * * file(````) * Directs all output to a file with the given . * * cout * Directs all output to the local standard output of the application instance on this :term:`locality`. * * cerr * Directs all output to the local standard error output of the application instance on this :term:`locality`. * * console * Directs all output to the console instance of the application. The console instance has its logging destinations configured separately. * * android_log * Directs all output to the (Android) system log (available on Android systems only). The logging format is read from the environment variable ``HPX_LOGFORMAT``, and it defaults to a complex format description. This format consists of several placeholder fields (for instance ``%locality%``), which will be replaced by concrete values when the logging output is generated. All other information is transferred verbatim to the output. The table below describes the available field placeholders. The separator character ``|`` separates the logging message prefix formatted as shown and the actual log message which will replace the separator. .. list-table:: Available field placeholders * * Name * Description * * :term:`locality` * The id of the :term:`locality` on which the logging message was generated. * * hpxthread * The id of the |hpx| thread generating this logging output. * * hpxphase * The phase [#]_ of the |hpx| thread generating this logging output. * * hpxcomponent * The local virtual address of the component which the current |hpx| thread is accessing. * * parentloc * The id of the :term:`locality` where the |hpx| thread was running that initiated the current |hpx| thread. The current |hpx| thread is generating this logging output. * * hpxparent * The id of the |hpx| thread that initiated the current |hpx| thread. The current |hpx| thread is generating this logging output. * * hpxparentphase * The phase of the |hpx| thread when it initiated the current |hpx| thread. The current |hpx| thread is generating this logging output. * * time * The time stamp for this logging outputline as generated by the source :term:`locality`. * * idx * The sequence number of the logging output line as generated on the source :term:`locality`. * * osthread * The sequence number of the OS thread that executes the current |hpx| thread. .. note:: Not all of the field placeholder may be expanded for all generated logging output. If no value is available for a particular field, it is replaced with a sequence of ``'-'`` characters. Here is an example line from a logging output generated by one of the |hpx| examples (please note that this is generated on a single line, without a line break): .. code-block:: text (T00000000/0000000002d46f90.01/00000000009ebc10) P--------/0000000002d46f80.02 17:49.37.320 [000000000000004d] [RT] successfully created component {0000000100ff0001, 0000000000030002} of type: component_barrier[7(3)] The default settings for the general logging category on the console is shown here: .. code-block:: ini [hpx.logging.console] level = ${HPX_LOGLEVEL:$[hpx.logging.level]} destination = ${HPX_CONSOLE_LOGDESTINATION:file(hpx.$[system.pid].log)} format = ${HPX_CONSOLE_LOGFORMAT:|} These settings define how the logging is customized once the logging output is received by the console instance of an application. The logging level is read from the environment variable ``HPX_LOGLEVEL`` (as set for the console instance of the application). The level defaults to the same values as the corresponding settings in the general logging configuration shown before. The destination on the console instance is set to be a file that's name is generated based on its OS process id. Setting the environment variable ``HPX_CONSOLE_LOGDESTINATION`` allows customization of the naming scheme for the output file. The logging format is set to leave the original logging output unchanged, as received from one of the localities the application runs on. .. _commandline: |hpx| Command Line Options ========================== The predefined command line options for any application using :cpp:func:`hpx::init` are described in the following subsections. .. todo:: Proofread the options. |hpx| options (allowed on command line only) -------------------------------------------- .. option:: --hpx:help Print out program usage (default: this message). Possible values: ``full`` (additionally prints options from components). .. option:: --hpx:version Print out |hpx| version and copyright information. .. option:: --hpx:info Print out |hpx| configuration information. .. option:: --hpx:options-file arg Specify a file containing command line options (alternatively: @filepath). |hpx| options (additionally allowed in an options file) ------------------------------------------------------- .. option:: --hpx:worker Run this instance in worker mode. .. option:: --hpx:console Run this instance in console mode. .. option:: --hpx:connect Run this instance in worker mode, but connecting late. .. option:: --hpx:run-agas-server Run :term:`AGAS` server as part of this runtime instance. .. option:: --hpx:run-hpx-main Run the hpx_main function, regardless of :term:`locality` mode. .. option:: --hpx:hpx arg The IP address the |hpx| parcelport is listening on, expected format: ``address:port`` (default: ``127.0.0.1:7910``). .. option:: --hpx:agas arg The IP address the :term:`AGAS` root server is running on, expected format: ``address:port`` (default: ``127.0.0.1:7910``). .. option:: --hpx:run-agas-server-only Run only the :term:`AGAS` server. .. option:: --hpx:nodefile arg The file name of a node file to use (list of nodes, one node name per line and core). .. option:: --hpx:nodes arg The (space separated) list of the nodes to use (usually this is extracted from a node file). .. option:: --hpx:endnodes This can be used to end the list of nodes specified using the option :option:`--hpx:nodes`. .. option:: --hpx:ifsuffix arg Suffix to append to host names in order to resolve them to the proper network interconnect. .. option:: --hpx:ifprefix arg Prefix to prepend to host names in order to resolve them to the proper network interconnect. .. option:: --hpx:iftransform arg Sed-style search and replace (``s/search/replace/``) used to transform host names to the proper network interconnect. .. option:: --hpx:localities arg The number of localities to wait for at application startup (default: ``1``). .. option:: --hpx:node arg Number of the node this :term:`locality` is run on (must be unique). .. option:: --hpx:ignore-batch-env Ignore batch environment variables. .. option:: --hpx:expect-connecting-localities This :term:`locality` expects other localities to dynamically connect (this is implied if the number of initial localities is larger than 1). .. option:: --hpx:pu-offset The first processing unit this instance of |hpx| should be run on (default: ``0``). .. option:: --hpx:pu-step The step between used processing unit numbers for this instance of |hpx| (default: ``1``). .. option:: --hpx:threads arg The number of operating system threads to spawn for this |hpx| :term:`locality`. Possible values are: numeric values ``1``, ``2``, ``3`` and so on, ``all`` (which spawns one thread per processing unit, includes hyperthreads), or ``cores`` (which spawns one thread per core) (default: ``cores``). .. option:: --hpx:cores arg The number of cores to utilize for this |hpx| :term:`locality` (default: ``all``, i.e., the number of cores is based on the number of threads :option:`--hpx:threads` assuming :option:`--hpx:bind`\ ``=compact``. .. option:: --hpx:affinity arg The affinity domain the OS threads will be confined to, possible values: ``pu``, ``core``, ``numa``, ``machine`` (default: ``pu``). .. option:: --hpx:bind arg he detailed affinity description for the OS threads, see :ref:`details` for a detailed description of possible values. Do not use with :option:`--hpx:pu-step`, :option:`--hpx:pu-offset` or :option:`--hpx:affinity` options. Implies :option:`--hpx:numa-sensitive` (:option:`--hpx:bind`\ ``=none``) disables defining thread affinities). .. option:: --hpx:use-process-mask Use the process mask to restrict available hardware resources (implies :option:`--hpx:ignore-batch-env`). .. option:: --hpx:print-bind Print to the console the bit masks calculated from the arguments specified to all :option:`--hpx:bind` options. .. option:: --hpx:queuing arg The queue scheduling policy to use. Options are ``local``, ``local-priority-fifo``, ``local-priority-lifo``, ``static``, ``static-priority``, ``abp-priority-fifo`` and ``abp-priority-lifo`` (default: ``local-priority-fifo``). .. option:: --hpx:high-priority-threads arg The number of operating system threads maintaining a high priority queue (default: number of OS threads), valid for :option:`--hpx:queuing`\ ``=abp-priority``, :option:`--hpx:queuing`\ ``=static-priority`` and :option:`--hpx:queuing`\ ``=local-priority`` only. .. option:: --hpx:numa-sensitive Makes the scheduler NUMA sensitive. |hpx| configuration options --------------------------- .. option:: --hpx:app-config arg Load the specified application configuration (ini) file. .. option:: --hpx:config arg Load the specified |hpx| configuration (ini) file. .. option:: --hpx:ini arg Add a configuration definition to the default runtime configuration. .. option:: --hpx:exit Exit after configuring the runtime. |hpx| debugging options ----------------------- .. option:: --hpx:list-symbolic-names List all registered symbolic names after startup. .. option:: --hpx:list-component-types List all dynamic component types after startup. .. option:: --hpx:dump-config-initial Print the initial runtime configuration. .. option:: --hpx:dump-config Print the final runtime configuration. .. option:: --hpx:debug-hpx-log [arg] Enable all messages on the |hpx| log channel and send all |hpx| logs to the target destination (default: ``cout``). .. option:: --hpx:debug-agas-log [arg] Enable all messages on the :term:`AGAS` log channel and send all :term:`AGAS` logs to the target destination (default: ``cout``). .. option:: --hpx:debug-parcel-log [arg] Enable all messages on the parcel transport log channel and send all parcel transport logs to the target destination (default: ``cout``). .. option:: --hpx:debug-timing-log [arg] Enable all messages on the timing log channel and send all timing logs to the target destination (default: ``cout``). .. option:: --hpx:debug-app-log [arg] Enable all messages on the application log channel and send all application logs to the target destination (default: ``cout``). .. option:: --hpx:debug-clp Debug command line processing. .. option:: --hpx:attach-debugger arg Wait for a debugger to be attached, possible arg values: ``startup`` or ``exception`` (default: ``startup``) |hpx| options related to performance counters --------------------------------------------- .. option:: --hpx:print-counter Print the specified performance counter either repeatedly and/or at the times specified by :option:`--hpx:print-counter-at` (see also option :option:`--hpx:print-counter-interval`). .. option:: --hpx:print-counter-reset Print the specified performance counter either repeatedly and/or at the times specified by :option:`--hpx:print-counter-at`. Reset the counter after the value is queried (see also option :option:`--hpx:print-counter-interval`). .. option:: --hpx:print-counter-interval Print the performance counter(s) specified with :option:`--hpx:print-counter` repeatedly after the time interval (specified in milliseconds), (default: ``0``, which means print once at shutdown). .. option:: --hpx:print-counter-destination Print the performance counter(s) specified with :option:`--hpx:print-counter` to the given file (default: ``console``). .. option:: --hpx:list-counters List the names of all registered performance counters, possible values: ``minimal`` (prints counter name skeletons), ``full`` (prints all available counter names). .. option:: --hpx:list-counter-infos List the description of all registered performance counters, possible values: ``minimal`` (prints info for counter name skeletons), ``full`` (prints all available counter infos). .. option:: --hpx:print-counter-format Print the performance counter(s) specified with :option:`--hpx:print-counter`. Possible formats in CSV include a format with a header or without any header (see option :option:`--hpx:no-csv-header`). Possible values: ``csv`` (prints counter values in CSV format with full names as header), ``csv-short`` (prints counter values in CSV format with short names provided with :option:`--hpx:print-counter` as :option:`--hpx:print-counter` ``shortname, full-countername`` .. option:: --hpx:no-csv-header Print the performance counter(s) specified with :option:`--hpx:print-counter` and ``csv`` or ``csv-short`` format specified with :option:`--hpx:print-counter-format` without header. .. option:: --hpx:print-counter-at arg Print the performance counter(s) specified with :option:`--hpx:print-counter` (or :option:`--hpx:print-counter-reset`) at the given point in time, possible argument values: ``startup``, ``shutdown`` (default), ``noshutdown``. .. option:: --hpx:reset-counters Reset all performance counter(s) specified with :option:`--hpx:print-counter` after they have been evaluated. .. option:: --hpx:print-counters-locally Each :term:`locality` prints only its own local counters. If this is used with :option:`--hpx:print-counter-destination`\ ``=``, the code will append a ``"."`` to the file name in order to avoid clashes between localities. Command line argument shortcuts ------------------------------- Additionally, the following shortcuts are available from every |hpx| application. .. table:: Predefined command line option shortcuts =============== ====================== Shortcut option Equivalent long option =============== ====================== ``-a`` :option:`--hpx:agas` ``-c`` :option:`--hpx:console` ``-h`` :option:`--hpx:help` ``-I`` :option:`--hpx:ini` ``-l`` :option:`--hpx:localities` ``-p`` :option:`--hpx:app-config` ``-q`` :option:`--hpx:queuing` ``-r`` :option:`--hpx:run-agas-server` ``-t`` :option:`--hpx:threads` ``-v`` :option:`--hpx:version` ``-w`` :option:`--hpx:worker` ``-x`` :option:`--hpx:hpx` ``-0`` :option:`--hpx:node`\ ``=0`` ``-1`` :option:`--hpx:node`\ ``=1`` ``-2`` :option:`--hpx:node`\ ``=2`` ``-3`` :option:`--hpx:node`\ ``=3`` ``-4`` :option:`--hpx:node`\ ``=4`` ``-5`` :option:`--hpx:node`\ ``=5`` ``-6`` :option:`--hpx:node`\ ``=6`` ``-7`` :option:`--hpx:node`\ ``=7`` ``-8`` :option:`--hpx:node`\ ``=8`` ``-9`` :option:`--hpx:node`\ ``=9`` =============== ====================== It is possible to define your own shortcut options. In fact, all of the shortcuts listed above are pre-defined using the technique described here. Also, it is possible to redefine any of the pre-defined shortcuts to expand differently as well. Shortcut options are obtained from the internal configuration database. They are stored as key-value properties in a special properties section named ``hpx.commandline``. You can define your own shortcuts by adding the corresponding definitions to one of the ini configuration files as described in the section :ref:`configuration`. For instance, in order to define a command line shortcut ``--p``, which should expand to ``-hpx:print-counter``, the following configuration information needs to be added to one of the ini configuration files: .. code-block:: ini [hpx.commandline.aliases] --pc = --hpx:print-counter .. note:: Any arguments for shortcut options passed on the command line are retained and passed as arguments to the corresponding expanded option. For instance, given the definition above, the command line option: .. code-block:: bash --pc=/threads{locality#0/total}/count/cumulative would be expanded to: .. code-block:: bash --hpx:print-counter=/threads{locality#0/total}/count/cumulative .. important:: Any shortcut option should either start with a single ``'-'`` or with two ``'--'`` characters. Shortcuts starting with a single ``'-'`` are interpreted as short options (i.e., everything after the first character following the ``'-'`` is treated as the argument). Shortcuts starting with ``'--'`` are interpreted as long options. No other shortcut formats are supported. Specifying options for single localities only --------------------------------------------- For runs involving more than one :term:`locality`, it is sometimes desirable to supply specific command line options to single localities only. When the |hpx| application is launched using a scheduler (like PBS; for more details see section :ref:`unix_pbs`), specifying dedicated command line options for single localities may be desirable. For this reason all of the command line options that have the general format ``--hpx:`` can be used in a more general form: ``--hpx::``, where is the number of the :term:`locality` this command line option will be applied to; all other localities will simply ignore the option. For instance, the following PBS script passes the option :option:`--hpx:pu-offset`\ ``=4`` to the :term:`locality` ``'1'`` only. .. code-block:: bash #!/bin/bash # #PBS -l nodes=2:ppn=4 APP_PATH=~/packages/hpx/bin/hello_world_distributed APP_OPTIONS= pbsdsh -u $APP_PATH $APP_OPTIONS --hpx:1:pu-offset=4 --hpx:nodes=`cat $PBS_NODEFILE` .. caution:: If the first application specific argument (inside ``$APP_OPTIONS``) is a non-option (i.e., does not start with a ``-`` or a ``--``), then it must be placed before the option :option:`--hpx:nodes`, which, in this case, should be the last option on the command line. Alternatively, use the option :option:`--hpx:endnodes` to explicitly mark the end of the list of node names: .. code-block:: shell-session $ pbsdsh -u $APP_PATH --hpx:1:pu-offset=4 --hpx:nodes=`cat $PBS_NODEFILE` --hpx:endnodes $APP_OPTIONS .. _details: More details about |hpx| command line options --------------------------------------------- This section documents the following list of the command line options in more detail: * :ref:`bind` .. _bind: The command line option :option:`--hpx:bind` ............................................ This command line option allows one to specify the required affinity of the |hpx| worker threads to the underlying processing units. As a result the worker threads will run only on the processing units identified by the corresponding bind specification. The affinity settings are to be specified using :option:`--hpx:bind`\ ``=``, where ```` have to be formatted as described below. In addition to the syntax described below, one can use :option:`--hpx:bind`\ ``=none`` to disable all binding of any threads to a particular core. This is mostly supported for debugging purposes. The specified affinities refer to specific regions within a machine hardware topology. In order to understand the hardware topology of a particular machine, it may be useful to run the lstopo tool, which is part of |hwloc|, to see the reported topology tree. Seeing and understanding a topology tree will definitely help in understanding the concepts that are discussed below. Affinities can be specified using hwloc tuples. Tuples of hwloc *objects* and associated *indexes* can be specified in the form ``object:index``, ``object:index-index`` or ``object:index,...,index``. Hwloc objects represent types of mapped items in a topology tree. Possible values for objects are ``socket``, ``numanode``, ``core`` and ``pu`` (processing unit). Indexes are non-negative integers that specify a unique physical object in a topology tree using its logical sequence number. Chaining multiple tuples together in the more general form ``object1:index1[.object2:index2[...]]`` is permissible. While the first tuple's object may appear anywhere in the topology, the Nth tuple's object must have a shallower topology depth than the (N+1)th tuple's object. Put simply: as you move right in a tuple chain, objects must go deeper in the topology tree. Indexes specified in chained tuples are relative to the scope of the parent object. For example, ``socket:0.core:1`` refers to the second core in the first socket (all indices are zero based). Multiple affinities can be specified using several :option:`--hpx:bind` command line options or by appending several affinities separated by a ``';'``. By default, if multiple affinities are specified, they are added. .. If prefixed with``"~"`` the given affinity will be cleared instead of added to the current list of locations. If prefixed with``"x"`` the given location will be and'ed instead of added to the current list. If prefixed with ``"^"`` the given location will be xor'ed. ``"all"`` is a special affinity consisting in the entire current topology. .. note:: All "names" in an affinity specification, such as ``thread``, ``socket``, ``numanode``, ``pu`` or ``all``, can be abbreviated. Thus, the affinity specification ``threads:0-3=socket:0.core:1.pu:1`` is fully equivalent to its shortened form ``t:0-3=s:0.c:1.p:1``. Here is a full grammar describing the possible format of mappings: .. productionlist:: mappings: `distribution` | `mapping` (";" `mapping`)* distribution: "compact" | "scatter" | "balanced" | "numa-balanced" mapping: `thread_spec` "=" `pu_specs` thread_spec: "thread:" `range_specs` pu_specs: `pu_spec` ("." `pu_spec`)* pu_spec: `type` ":" `range_specs` | "~" `pu_spec` range_specs: `range_spec` ("," `range_spec`)* range_spec: int | int "-" int | "all" type: "socket" | "numanode" | "core" | "pu" The following example assumes a system with at least 4 cores, where each core has more than 1 processing unit (hardware threads). Running ``hello_world_distributed`` with 4 OS threads (on 4 processing units), where each of those threads is bound to the first processing unit of each of the cores, can be achieved by invoking: .. code-block:: shell-session $ hello_world_distributed -t4 --hpx:bind=thread:0-3=core:0-3.pu:0 Here, ``thread:0-3`` specifies the OS threads used to define affinity bindings, and ``core:0-3.pu:`` defines that for each of the cores (``core:0-3``) only their first processing unit ``pu:0`` should be used. .. note:: The command line option :option:`--hpx:print-bind` can be used to print the bitmasks generated from the affinity mappings as specified with :option:`--hpx:bind`. For instance, on a system with hyperthreading enabled (i.e. 2 processing units per core), the command line: .. code-block:: shell-session $ hello_world_distributed -t4 --hpx:bind=thread:0-3=core:0-3.pu:0 --hpx:print-bind will cause this output to be printed: .. code-block:: text 0: PU L#0(P#0), Core L#0, Socket L#0, Node L#0(P#0) 1: PU L#2(P#2), Core L#1, Socket L#0, Node L#0(P#0) 2: PU L#4(P#4), Core L#2, Socket L#0, Node L#0(P#0) 3: PU L#6(P#6), Core L#3, Socket L#0, Node L#0(P#0) where each bit in the bitmasks corresponds to a processing unit the listed worker thread will be bound to run on. The difference between the four possible predefined distribution schemes (``compact``, ``scatter``, ``balanced`` and ``numa-balanced``) is best explained with an example. Imagine that we have a system with 4 cores and 4 hardware threads per core on 2 sockets. If we place 8 threads the assignments produced by the ``compact``, ``scatter``, ``balanced`` and ``numa-balanced`` types are shown in the figure below. Notice that ``compact`` does not fully utilize all the cores in the system. For this reason it is recommended that applications are run using the ``scatter`` or ``balanced``/``numa-balanced`` options in most cases. .. _commandline_affinities: .. figure:: ../_static/images/affinities.png Schematic of thread affinity type distributions. In addition to the predefined distributions it is possible to restrict the resources used by |hpx| to the process CPU mask. The CPU mask is typically set by e.g. |mpi|_ and batch environments. Using the command line option :option:`--hpx:use-process-mask` makes |hpx| act as if only the processing units in the CPU mask are available for use by |hpx|. The number of threads is automatically determined from the CPU mask. The number of threads can still be changed manually using this option, but only to a number less than or equal to the number of processing units in the CPU mask. The option :option:`--hpx:print-bind` is useful in conjunction with :option:`--hpx:use-process-mask` to make sure threads are placed as expected. .. [#] The phase of a |hpx|-thread counts how often this thread has been activated.