Running on batch systems¶
This section walks you through launching HPX applications on various batch systems.
How to use HPX applications with PBS¶
Most HPX applications are executed on parallel computers. These platforms typically provide integrated job management services that facilitate the allocation of computing resources for each parallel program. HPX includes out of the box support for one of the most common job management systems, the Portable Batch System (PBS).
All PBS jobs require a script to specify the resource requirements and other
parameters associated with a parallel job. The PBS script is basically a shell
script with PBS directives placed within commented sections at the beginning of
the file. The remaining (not commented-out) portions of the file executes just
like any other regular shell script. While the description of all available PBS
options is outside the scope of this tutorial (the interested reader may refer
to in-depth documentation for
more information), below is a minimal example to illustrate the approach. As a
test application we will use the multithreaded
explained in the section Remote execution with actions: Hello world.
#!/bin/bash # #PBS -l nodes=2:ppn=4 APP_PATH=~/packages/hpx/bin/hello_world APP_OPTIONS= pbsdsh -u $APP_PATH $APP_OPTIONS --hpx:nodes=`cat $PBS_NODEFILE`
If the first application specific argument (inside
$APP_OPTIONS) is a
non-option (i.e. does not start with a
- or a
--), then those have to
be placed before the option
--hpx:nodes, which in this case should
be the last option on the command line.
Alternatively, use the option
--hpx:endnodes to explicitly mark the
end of the list of node names:
pbsdsh -u $APP_PATH --hpx:nodes`cat $PBS_NODEFILE` --hpx:endnodes $APP_OPTIONS
#PBS -l nodes=2:ppn=4 directive will cause two compute nodes to be
allocated for the application, as specified in the option
nodes. Each of the
nodes will dedicate four cores to the program, as per the option
for “processors per node” (PBS does not distinguish between processors and
cores). Note that requesting more cores per node than physically available is
pointless and may prevent PBS from accepting the script.
On newer PBS versions the PBS command syntax might be different. For instance, the PBS script above would look like:
#!/bin/bash # #PBS -l select=2:ncpus=4 APP_PATH=~/packages/hpx/bin/hello_world APP_OPTIONS= pbsdsh -u $APP_PATH $APP_OPTIONS --hpx:nodes=`cat $PBS_NODEFILE`
APP_OPTIONS are shell variables that respectively specify
the correct path to the executable (
hello_world in this case) and the
command line options. Since the
hello_world application doesn’t need any
command line options,
APP_OPTIONS has been left empty. Unlike in other
execution environments, there is no need to use the
option to indicate the required number of OS threads per node; the HPX library
will derive this parameter automatically from PBS.
Finally, pbsdsh is a PBS command that starts tasks to the resources allocated to the current job. It is recommended to leave this line as shown and modify only the PBS options and shell variables as needed for a specific application.
A script invoked by pbsdsh starts in a very basic environment: the user’s
$HOME directory is defined and is the current directory, the
variable is set to
C and the
PATH is set to the basic
/usr/local/bin:/usr/bin:/bin as defined in a system-wide file
pbs_environment. Nothing that would normally be set up by a system shell
profile or user shell profile is defined, unlike the environment for the main
Another choice is for the pbsdsh command in your main job script to invoke
your program via a shell, like
bash so that it gives an initialized
environment for each instance. We create a small script
runme.sh which is used
to invoke the program:
#!/bin/bash # Small script which invokes the program based on what was passed on its # command line. # # This script is executed by the bash shell which will initialize all # environment variables as usual. $@
Now, we invoke this script using the pbsdsh tool:
#!/bin/bash # #PBS -l nodes=2:ppn=4 APP_PATH=~/packages/hpx/bin/hello_world APP_OPTIONS= pbsdsh -u runme.sh $APP_PATH $APP_OPTIONS --hpx:nodes=`cat $PBS_NODEFILE`
All that remains now is submitting the job to the queuing system. Assuming that
the contents of the PBS script were saved in file
pbs_hello_world.sh in the
current directory, this is accomplished by typing:
If the job is accepted, qsub will print out the assigned job ID, which may look like:
To check the status of your job, issue the following command:
and look for a single-letter job status symbol. The common cases include:
- Q - signifies that the job is queued and awaiting its turn to be executed.
- R - indicates that the job is currently running.
- C - means that the job has completed.
The example qstat output below shows a job waiting for execution resources to become available:
Job id Name User Time Use S Queue ------------------------- ---------------- --------------- -------- - ----- 42.supercomputer ...ello_world.sh joe_user 0 Q batch
After the job completes, PBS will place two files,
pbs_hello_world.sh.e42, in the directory where the job was submitted. The
first contains the standard output and the second contains the standard error
from all the nodes on which the application executed. In our example, the error
output file should be empty and standard output file should contain something
hello world from OS-thread 3 on locality 0 hello world from OS-thread 2 on locality 0 hello world from OS-thread 1 on locality 1 hello world from OS-thread 0 on locality 0 hello world from OS-thread 3 on locality 1 hello world from OS-thread 2 on locality 1 hello world from OS-thread 1 on locality 0 hello world from OS-thread 0 on locality 1
Congratulations! You have just run your first distributed HPX application!
How to use HPX applications with SLURM¶
Just like PBS (described in section How to use HPX applications with PBS), SLURM is a job management system which is widely used on large supercomputing systems. Any HPX application can easily be run using SLURM. This section describes how this can be done.
The easiest way to run an HPX application using SLURM is to utilize the command line tool srun which interacts with the SLURM batch scheduling system:
srun -p <partition> -N <number-of-nodes> hpx-application <application-arguments>
<partition> is one of the node partitions existing on the target
machine (consult the machines documentation to get a list of existing
<number-of-nodes> is the number of compute nodes you want to
use. By default, the HPX application is started with one locality per
node and uses all available cores on a node. You can change the number of
localities started per node (for example to account for NUMA effects) by
-n option of srun. The number of cores per locality
can be set by
<application-arguments> are any application
specific arguments which need to be passed on to the application.
There is no need to use any of the HPX command line options related to the number of localities, number of threads, or related to networking ports. All of this information is automatically extracted from the SLURM environment by the HPX startup code.
The srun documentation explicitly states: “If
-c is specified without
-n as many tasks will be allocated per node as possible while satisfying
-c restriction. For instance on a cluster with 8 CPUs per node, a job
request for 4 nodes and 3 CPUs per task may be allocated 3 or 6 CPUs per node
(1 or 2 tasks per node) depending upon resource consumption by other jobs.”
For this reason, we suggest to always specify
<number-of-instances> is equal to one (
To get an interactive development shell on one of the nodes you can issue the following command:
srun -p <node-type> -N <number-of-nodes> --pty /bin/bash -l
After the shell has been opened, you can run your HPX application. By default,
it uses all available cores. Note that if you requested one node, you don’t need
srun again. However, if you requested more than one node, and want to
run your distributed application, you can use
srun again to start up the
distributed HPX application. It will use the resources that have been requested
for the interactive shell.
Scheduling batch jobs¶
The above mentioned method of running HPX applications is fine for development
purposes. The disadvantage that comes with
srun is that it only returns once
the application is finished. This might not be appropriate for longer running
applications (for example benchmarks or larger scale simulations). In order to
cope with that limitation you can use the sbatch command.
sbatch command expects a script that it can run once the requested
resources are available. In order to request resources you need to add
#SBATCH comments in your script or provide the necessary parameters to
sbatc directly. The parameters are the same as with
run. The commands
you need to execute are the same you would need to start your application as if
you were in an interactive shell.