hpx/parallel/algorithms/mismatch.hpp

template<typename ExPolicy, typename FwdIter1, typename FwdIter2, typename Pred>
hpx::parallel::util::detail::algorithm_result_t<ExPolicy, std::pair<FwdIter1, FwdIter2>> mismatch(ExPolicy &&policy, FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, FwdIter2 last2, Pred &&op)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1). Executed according to the policy.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type sequenced_policy execute in sequential order in the calling thread.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type parallel_policy or parallel_task_policy are permitted to execute in an unordered fashion in unspecified threads, and indeterminately sequenced within each thread.

Note

Complexity: At most min(last1 - first1, last2 - first2) applications of the predicate op or operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of the predicate op or operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

ExPolicy – The type of the execution policy to use (deduced). It describes the manner in which the execution of the algorithm may be parallelized and the manner in which it executes the assignments.
FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

policy – The execution policy to use for the scheduling of the iterations.
first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
last2 – Refers to the end of the sequence of elements of the second range the algorithm will be applied to.
op – The binary predicate which returns true if the elements should be treated as mismatch. The signature of the predicate function should be equivalent to the following:
```
bool pred(const Type1 &a, const Type2 &b);
```
The signature does not need to have const &, but the function must not modify the objects passed to it. The types Type1 and Type2 must be such that objects of types FwdIter1 and FwdIter2 can be dereferenced and then implicitly converted to Type1 and Type2 respectively

Returns

The mismatch algorithm returns a hpx::future<std::pair<FwdIter1,FwdIter2>> if the execution policy is of type sequenced_task_policy or parallel_task_policy and returns std::pair<FwdIter1,FwdIter2> otherwise. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename ExPolicy, typename FwdIter1, typename FwdIter2>
hpx::parallel::util::detail::algorithm_result_t<ExPolicy, std::pair<FwdIter1, FwdIter2>> mismatch(ExPolicy &&policy, FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, FwdIter2 last2)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1). Executed according to the policy.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type sequenced_policy execute in sequential order in the calling thread.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type parallel_policy or parallel_task_policy are permitted to execute in an unordered fashion in unspecified threads, and indeterminately sequenced within each thread.

Note

Complexity: At most min(last1 - first1, last2 - first2) applications of operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

ExPolicy – The type of the execution policy to use (deduced). It describes the manner in which the execution of the algorithm may be parallelized and the manner in which it executes the assignments.
FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.

Parameters

policy – The execution policy to use for the scheduling of the iterations.
first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
last2 – Refers to the end of the sequence of elements of the second range the algorithm will be applied to.

Returns

The mismatch algorithm returns a hpx::future<std::pair<FwdIter1,FwdIter2>> if the execution policy is of type sequenced_task_policy or parallel_task_policy and returns std::pair<FwdIter1,FwdIter2> otherwise. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename ExPolicy, typename FwdIter1, typename FwdIter2, typename Pred>
hpx::parallel::util::detail::algorithm_result_t<ExPolicy, std::pair<FwdIter1, FwdIter2>> mismatch(ExPolicy &&policy, FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, Pred &&op)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1). Executed according to the policy.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type sequenced_policy execute in sequential order in the calling thread.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type parallel_policy or parallel_task_policy are permitted to execute in an unordered fashion in unspecified threads, and indeterminately sequenced within each thread.

Note

Complexity: At most last1 - first1 applications of the predicate op or operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of the predicate op or operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

ExPolicy – The type of the execution policy to use (deduced). It describes the manner in which the execution of the algorithm may be parallelized and the manner in which it executes the assignments.
FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

policy – The execution policy to use for the scheduling of the iterations.
first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
op – The binary predicate which returns true if the elements should be treated as mismatch. The signature of the predicate function should be equivalent to the following:
```
bool pred(const Type1 &a, const Type2 &b);
```
The signature does not need to have const &, but the function must not modify the objects passed to it. The types Type1 and Type2 must be such that objects of types FwdIter1 and FwdIter2 can be dereferenced and then implicitly converted to Type1 and Type2 respectively

Returns

The mismatch algorithm returns a hpx::future<std::pair<FwdIter1,FwdIter2>> if the execution policy is of type sequenced_task_policy or parallel_task_policy and returns std::pair<FwdIter1,FwdIter2> otherwise. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename ExPolicy, typename FwdIter1, typename FwdIter2>
hpx::parallel::util::detail::algorithm_result_t<ExPolicy, std::pair<FwdIter1, FwdIter2>> mismatch(ExPolicy &&policy, FwdIter1 first1, FwdIter1 last1, FwdIter2 first2)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1). Executed according to the policy.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type sequenced_policy execute in sequential order in the calling thread.

The comparison operations in the parallel mismatch algorithm invoked with an execution policy object of type parallel_policy or parallel_task_policy are permitted to execute in an unordered fashion in unspecified threads, and indeterminately sequenced within each thread.

Note

Complexity: At most last1 - first1 applications of operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

ExPolicy – The type of the execution policy to use (deduced). It describes the manner in which the execution of the algorithm may be parallelized and the manner in which it executes the assignments.
FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

policy – The execution policy to use for the scheduling of the iterations.
first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.

Returns

The mismatch algorithm returns a hpx::future<std::pair<FwdIter1,FwdIter2>> if the execution policy is of type sequenced_task_policy or parallel_task_policy and returns std::pair<FwdIter1,FwdIter2> otherwise. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename FwdIter1, typename FwdIter2, typename Pred>
std::pair<FwdIter1, FwdIter2> mismatch(FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, FwdIter2 last2, Pred &&op)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1).

Note

Complexity: At most min(last1 - first1, last2 - first2) applications of the predicate op or operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of the predicate op or operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
last2 – Refers to the end of the sequence of elements of the second range the algorithm will be applied to.
op – The binary predicate which returns true if the elements should be treated as mismatch. The signature of the predicate function should be equivalent to the following:
```
bool pred(const Type1 &a, const Type2 &b);
```
The signature does not need to have const &, but the function must not modify the objects passed to it. The types Type1 and Type2 must be such that objects of types FwdIter1 and FwdIter2 can be dereferenced and then implicitly converted to Type1 and Type2 respectively

Returns

The mismatch algorithm returns a std::pair<FwdIter1,FwdIter2>. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename FwdIter1, typename FwdIter2>
std::pair<FwdIter1, FwdIter2> mismatch(FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, FwdIter2 last2)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1).

Note

Complexity: At most min(last1 - first1, last2 - first2) applications of operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.

Parameters

first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
last2 – Refers to the end of the sequence of elements of the second range the algorithm will be applied to.

Returns

The mismatch algorithm returns a std::pair<FwdIter1,FwdIter2>. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename FwdIter1, typename FwdIter2, typename Pred>
std::pair<FwdIter1, FwdIter2> mismatch(FwdIter1 first1, FwdIter1 last1, FwdIter2 first2, Pred &&op)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1).

Note

Complexity: At most last1 - first1 applications of the predicate op or operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of the predicate op or operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.
op – The binary predicate which returns true if the elements should be treated as mismatch. The signature of the predicate function should be equivalent to the following:
```
bool pred(const Type1 &a, const Type2 &b);
```
The signature does not need to have const &, but the function must not modify the objects passed to it. The types Type1 and Type2 must be such that objects of types FwdIter1 and FwdIter2 can be dereferenced and then implicitly converted to Type1 and Type2 respectively

Returns

The mismatch algorithm returns a std::pair<FwdIter1,FwdIter2>. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

template<typename FwdIter1, typename FwdIter2>
std::pair<FwdIter1, FwdIter2> mismatch(FwdIter1 first1, FwdIter1 last1, FwdIter2 first2)#

Returns the first mismatching pair of elements from two ranges: one defined by [first1, last1) and another defined by [first2,last2). If last2 is not provided, it denotes first2 + (last1 - first1).

Note

Complexity: At most last1 - first1 applications of operator==. If FwdIter1 and FwdIter2 meet the requirements of RandomAccessIterator and (last1 - first1) != (last2 - first2) then no applications of operator== are made.

Note

The two ranges are considered mismatch if, for every iterator i in the range [first1,last1), *i mismatchs *(first2 + (i - first1)). This overload of mismatch uses operator== to determine if two elements are mismatch.

Template Parameters

FwdIter1 – The type of the source iterators used for the first range (deduced). This iterator type must meet the requirements of an forward iterator.
FwdIter2 – The type of the source iterators used for the second range (deduced). This iterator type must meet the requirements of an forward iterator.
Pred – The type of an optional function/function object to use. Unlike its sequential form, the parallel overload of mismatch requires Pred to meet the requirements of CopyConstructible. This defaults to std::equal_to<>

Parameters

first1 – Refers to the beginning of the sequence of elements of the first range the algorithm will be applied to.
last1 – Refers to the end of the sequence of elements of the first range the algorithm will be applied to.
first2 – Refers to the beginning of the sequence of elements of the second range the algorithm will be applied to.

Returns

The mismatch algorithm returns a std::pair<FwdIter1,FwdIter2>. If no mismatches are found when the comparison reaches last1 or last2, whichever happens first, the pair holds the end iterator and the corresponding iterator from the other range.

hpx/parallel/algorithms/mismatch.hpp#