Contents

Building HPX

Basic information

The build system for HPX is based on CMake, a cross-platform build-generator tool which is not responsible for building the project but rather generates the files needed by your build tool (GNU make, Visual Studio, etc.) for building HPX. If CMake is not already installed in your system, you can download it and install it here: CMake Downloads.

Once CMake has been run, the build process can be started. The HPX build process is highly configurable through CMake, and various CMake variables influence the build process. The build process consists of the following parts:

  • The HPX core libraries (target core): This forms the basic set of HPX libraries.

  • HPX Examples (target examples): This target is enabled by default and builds all HPX examples (disable by setting HPX_WITH_EXAMPLES:BOOL=Off). HPX examples are part of the all target and are included in the installation if enabled.

  • HPX Tests (target tests): This target builds the HPX test suite and is enabled by default (disable by setting HPX_WITH_TESTS:BOOL =Off). They are not built by the all target and have to be built separately.

  • HPX Documentation (target docs): This target builds the documentation, and is not enabled by default (enable by setting HPX_WITH_DOCUMENTATION:BOOL=On. For more information see Documentation.

For a complete list of available CMake variables that influence the build of HPX, see CMake variables used to configure HPX.

The variables can be used to refine the recipes that can be found at Platform specific build recipes which show some basic steps on how to build HPX for a specific platform.

In order to use HPX, only the core libraries are required. In order to use the optional libraries, you need to specify them as link dependencies in your build (See Creating HPX projects).

Most important CMake options

While building HPX, you are provided with multiple CMake options which correspond to different configurations. Below, there is a set of the most important and frequently used CMake options.

HPX_WITH_MALLOC

Use a custom allocator. Using a custom allocator tuned for multithreaded applications is very important for the performance of HPX applications. When debugging applications, it’s useful to set this to system, as custom allocators can hide some memory-related bugs. Note that setting this to something other than system requires an external dependency.

HPX_WITH_CUDA

Enable support for CUDA. Use CMAKE_CUDA_COMPILER to set the CUDA compiler. This is a standard CMake variable, like CMAKE_CXX_COMPILER.

HPX_WITH_PARCELPORT_MPI

Enable the MPI parcelport. This enables the use of MPI for the networking operations in the HPX runtime. The default value is OFF because it’s not available on all systems and/or requires another dependency. However, it is the recommended parcelport.

HPX_WITH_PARCELPORT_TCP

Enable the TCP parcelport. Enables the use of TCP for networking in the runtime. The default value is ON. However, it’s only recommended for debugging purposes, as it is slower than the MPI parcelport.

HPX_WITH_APEX

Enable APEX integration. APEX can be used to profile HPX applications. In particular, it provides information about individual tasks in the HPX runtime.

HPX_WITH_GENERIC_CONTEXT_COROUTINES

Enable Boost. Context for task context switching. It must be enabled for non-x86 architectures such as ARM and Power.

HPX_WITH_MAX_CPU_COUNT

Set the maximum CPU count supported by HPX. The default value is 64, and should be set to a number at least as high as the number of cores on a system including virtual cores such as hyperthreads.

HPX_WITH_CXX_STANDARD

Set a specific C++ standard version e.g. HPX_WITH_CXX_STANDARD=20. The default and minimum value is 17.

HPX_WITH_EXAMPLES

Build examples.

HPX_WITH_TESTS

Build tests.

For a complete list of available CMake variables that influence the build of HPX, see CMake variables used to configure HPX.

Build types

CMake can be configured to generate project files suitable for builds that have enabled debugging support or for an optimized build (without debugging support). The CMake variable used to set the build type is CMAKE_BUILD_TYPE (for more information see the CMake Documentation). Available build types are:

  • Debug: Full debug symbols are available as well as additional assertions to help debugging. To enable the debug build type for the HPX API, the C++ Macro HPX_DEBUG is defined.

  • RelWithDebInfo: Release build with debugging symbols. This is most useful for profiling applications

  • Release: Release build. This disables assertions and enables default compiler optimizations.

  • RelMinSize: Release build with optimizations for small binary sizes.

Important

We currently don’t guarantee ABI compatibility between Debug and Release builds. Please make sure that applications built against HPX use the same build type as you used to build HPX. For CMake builds, this means that the CMAKE_BUILD_TYPE variables have to match and for projects not using CMake, the HPX_DEBUG macro has to be set in debug mode.

Platform specific build recipes

Unix variants

Once you have the source code and the dependencies and assuming all your dependencies are in paths known to CMake, the following gets you started:

  1. First, set up a separate build directory to configure the project:

    $ mkdir build && cd build

  2. To configure the project you have the following options:

    • To build the core HPX libraries and examples, and install them to your chosen location (recommended):

    $ cmake -DCMAKE_INSTALL_PREFIX=/install/path ..

    Tip

    If you want to change CMake variables for your build, it is usually a good idea to start with a clean build directory to avoid configuration problems. It is especially important that you use a clean build directory when changing between Release and Debug modes.

    • To install HPX to the default system folders, simply leave out the CMAKE_INSTALL_PREFIX option:

    $ cmake ..

    • If your dependencies are in custom locations, you may need to tell CMake where to find them by passing one or more options to CMake as shown below:

    $ cmake -DBOOST_ROOT=/path/to/boost
      -DHWLOC_ROOT=/path/to/hwloc
      -DTCMALLOC_ROOT=/path/to/tcmalloc
      -DJEMALLOC_ROOT=/path/to/jemalloc
      [other CMake variable definitions]
      /path/to/source/tree

    For instance:

    $ cmake -DBOOST_ROOT=~/packages/boost -DHWLOC_ROOT=/packages/hwloc -DCMAKE_INSTALL_PREFIX=~/packages/hpx ~/downloads/hpx_1.5.1

    • If you want to try HPX without using a custom allocator pass -DHPX_WITH_MALLOC=system to CMake:

    $ cmake -DCMAKE_INSTALL_PREFIX=/install/path -DHPX_WITH_MALLOC=system ..

    Note

    Please pay special attention to the section about HPX_WITH_MALLOC:STRING as this is crucial for getting decent performance.

    Important

    If you are building HPX for a system with more than 64 processing units, you must change the CMake variable HPX_WITH_MAX_CPU_COUNT (to a value at least as big as the number of (virtual) cores on your system). Note that the default value is 64.

    Caution

    Compiling and linking HPX needs a considerable amount of memory. It is advisable that at least 2 GB of memory per parallel process is available.

  3. Once the configuration is complete, to build the project you run:

$ cmake --build . --target install

Windows

Note

The following build recipes are mostly user-contributed and may be outdated. We always welcome updated and new build recipes.

To build HPX under Windows 10 x64 with Visual Studio 2015:

  • Download the CMake V3.18.1 installer (or latest version) from here

  • Download the hwloc V1.11.0 (or the latest version) from here and unpack it.

  • Download the latest Boost libraries from here and unpack them.

  • Build the Boost DLLs and LIBs by using these commands from Command Line (or PowerShell). Open CMD/PowerShell inside the Boost dir and type in:

    bootstrap.bat

    This batch file will set up everything needed to create a successful build. Now execute:

    b2.exe link=shared variant=release,debug architecture=x86 address-model=64 threading=multi --build-type=complete install

    This command will start a (very long) build of all available Boost libraries. Please, be patient.

  • Open CMake-GUI.exe and set up your source directory (input field ‘Where is the source code’) to the base directory of the source code you downloaded from HPX’s GitHub pages. Here’s an example of CMake path settings, which point to the Documents/GitHub/hpx folder:

    ../_images/cmake_settings1.png

    Fig. 3 Example CMake path settings.

    Inside ‘Where is the source-code’ enter the base directory of your HPX source directory (do not enter the “src” sub-directory!). Inside ‘Where to build the binaries’ you should put in the path where all the building processes will happen. This is important because the building machinery will do an “out-of-tree” build. CMake will not touch or change the original source files in any way. Instead, it will generate Visual Studio Solution Files, which will build HPX packages out of the HPX source tree.

  • Set three new environment variables (in CMake, not in Windows environment): BOOST_ROOT, HWLOC_ROOT, CMAKE_INSTALL_PREFIX. The meaning of these variables is as follows:

    • BOOST_ROOT the HPX root directory of the unpacked Boost headers/cpp files.

    • HWLOC_ROOT the HPX root directory of the unpacked Portable Hardware Locality files.

    • CMAKE_INSTALL_PREFIX the HPX root directory where the future builds of HPX should be installed.

      Note

      HPX is a very large software collection, so it is not recommended to use the default C:\Program Files\hpx. Many users may prefer to use simpler paths without whitespace, like C:\bin\hpx or D:\bin\hpx etc.

    To insert new env-vars click on “Add Entry” and then insert the name inside “Name”, select PATH as Type and put the path-name in the “Path” text field. Repeat this for the first three variables.

    This is how variable insertion will look:

    ../_images/cmake_settings2.png

    Fig. 4 Example CMake adding entry.

    Alternatively, users could provide BOOST_LIBRARYDIR instead of BOOST_ROOT; the difference is that BOOST_LIBRARYDIR should point to the subdirectory inside Boost root where all the compiled DLLs/LIBs are. For example, BOOST_LIBRARYDIR may point to the bin.v2 subdirectory under the Boost rootdir. It is important to keep the meanings of these two variables separated from each other: BOOST_DIR points to the ROOT folder of the Boost library. BOOST_LIBRARYDIR points to the subdir inside the Boost root folder where the compiled binaries are.

  • Click the ‘Configure’ button of CMake-GUI. You will be immediately presented with a small window where you can select the C++ compiler to be used within Visual Studio. This has been tested using the latest v14 (a.k.a C++ 2015) but older versions should be sufficient too. Make sure to select the 64Bit compiler.

  • After the generate process has finished successfully, click the ‘Generate’ button. Now, CMake will put new VS Solution files into the BUILD folder you selected at the beginning.

  • Open Visual Studio and load the HPX.sln from your build folder.

  • Go to CMakePredefinedTargets and build the INSTALL project:

    ../_images/vs_targets_install.png

    Fig. 5 Visual Studio INSTALL target.

    It will take some time to compile everything, and in the end you should see an output similar to this one:

    ../_images/vs_build_output.png

    Fig. 6 Visual Studio build output.

Tests and examples

Running tests

To build the tests:

$ cmake --build . --target tests

To control which tests to run use ctest:

  • To run single tests, for example a test for for_loop:

$ ctest --output-on-failure -R tests.unit.modules.algorithms.for_loop

  • To run a whole group of tests:

$ ctest --output-on-failure -R tests.unit

Running examples

  • To build (and install) all examples invoke:

$ cmake -DHPX_WITH_EXAMPLES=On .
$ make examples
$ make install

  • To build the hello_world_1 example run:

$ make hello_world_1

HPX executables end up in the bin directory in your build directory. You can now run hello_world_1 and should see the following output:

$ ./bin/hello_world_1
Hello World!

You’ve just run an example which prints Hello World! from the HPX runtime. The source for the example is in examples/quickstart/hello_world_1.cpp. The hello_world_distributed example (also available in the examples/quickstart directory) is a distributed hello world program, which is described in Remote execution with actions. It provides a gentle introduction to the distributed aspects of HPX.

Tip

Most build targets in HPX have two names: a simple name and a hierarchical name corresponding to what type of example or test the target is. If you are developing HPX it is often helpful to run make help to get a list of available targets. For example, make help | grep hello_world outputs the following:

... examples.quickstart.hello_world_2
... hello_world_2
... examples.quickstart.hello_world_1
... hello_world_1
... examples.quickstart.hello_world_distributed
... hello_world_distributed

It is also possible to build, for instance, all quickstart examples using make examples.quickstart.